Samsung OM55N-DS - User Manual

Questions and Answers

T
Thomas KramerAug 11, 2025
Why is my connected device not displayed on my Samsung Monitor?
- C
  Cynthia WallaceAug 11, 2025
  If your connected device isn't showing up, first ensure it supports Anynet+ features. Check that the HDMI cable is correctly plugged in and that Anynet+ (HDMI-CEC) is enabled in the System menu. You may also need to search for Anynet+ devices again. Remember, Anynet+ needs an HDMI connection, and some HDMI cables might not support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
L
lisaswansonAug 18, 2025
How to fix Anynet+ not working on Samsung Monitor?
- C
  Christopher DelacruzAug 19, 2025
  If Anynet+ isn't working on your Samsung Monitor, verify that the connected device is an Anynet+ compatible device. Ensure the device's power cord is properly connected, and check the Video/Audio/HDMI cable connections. Also, confirm that Anynet+ (HDMI-CEC) is turned On in the System menu and that your remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup.
J
Jessica MasseyAug 27, 2025
How to start Anynet+ on a Samsung OM55N-DS Monitor?
- D
  Daniel BruceAug 27, 2025
  To start Anynet+ on your Samsung Monitor, ensure the Anynet+ device is correctly connected to the monitor and that Anynet+ (HDMI-CEC) is enabled in the System menu.
A
aaron94Sep 3, 2025
How to exit Anynet+ on a Samsung Monitor?
- M
  Mitchell BellSep 3, 2025
  To exit Anynet+ on your Samsung Monitor, press the SOURCE button on the monitor's remote control and choose a device that is not Anynet+ compatible.

Samsung OM55N-DS Specifications

General

Display Type	LED
Panel Technology	VA
Contrast Ratio	4000:1
Viewing Angle (H/V)	178°/178°
Connectivity	HDMI, DisplayPort, DVI-D, USB
Operating Temperature	0°C to 40°C
Aspect Ratio	16:9
Color Support	16.7 million colors
Screen Size	55 inches
Response Time	8 ms
Input Ports	HDMI, DisplayPort, USB
Resolution	1920 x 1080 (Full HD)