Samsung OM55N-DS - Flesh Tone; RGB Only Mode; Color Space Settings; Input Signal Plus

67
Flesh Tone
Adjust the flesh tone color by increasing or decreasing red levels.
RGB Only Mode
Fine-tune the saturation and tint of the red, green, and blue color channels.
 Off / Red / Green / Blue
Color Space Settings
Configure color space settings to refine the spectrum of colors on your screen.
Color Space
Choose a color space.
 Auto / Native / Custom
"
To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
Input Signal Plus
Expands the input signal range for HDMI connections.
 HDMI1 (Off ( ) / On ( ))
 HDMI2 (Off ( ) / On ( ))
"
When Input Signal Plus is set to On, up to the 4096 x 2160p @ 60 Hz resolution is supported.
When Input Signal Plus is set to Off, up to the 1920 x 1080 @ 60 Hz resolution is supported.
"
The screen may blink when HDMI2 Input Signal Plus On/Off from the DP source.
Supported Resolutions for UHD Input Signals
Check the supported resolution for UHD input signals.
 Resolution: 3840 x 2160p, 4096 x 2160p
"
Even if the UHD signal is input, display outputs as a 1920 x 1080 @ 60 Hz resolution on the
actual screen.
If Input Signal Plus is set to Off
Frame rate
(fps)
Color Depth / Chroma
Sampling
RGB
4:4:4
YCbCr
4:4:4
YCbCr
4:2:2
YCbCr
4:2:0
50 / 60 8 bit - - - O
If Input Signal Plus is set to On
Frame rate
(fps)
Color Depth / Chroma
Sampling
RGB
4:4:4
YCbCr
4:4:4
YCbCr
4:2:2
YCbCr
4:2:0
50 / 60
8 bit O O O O
10 bit - - O O
12 bit - - O O
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is
in motion.
 Off / On