Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic, Standard, or Movie.
Press the ENTER button.
• Dynamic : Select the picture for high-definition in a bright room.
• Standard : Select the picture for the optimum display in a normal environment.
• Movie : Select the picture for viewing movies in a dark room.
3 Press the EXIT button to exit.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Picture Mode.
3 Press the ◄ or ► button to select the required option.
4.
Press the EXIT or TOOLS button to exit.
Customizing the Picture Settings
Your television has several setting options that allow you to control the picture quality.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ▲ or ▼ button to select Cell Light, Contrast, Brightness,
Sharpness, Color, or Tint, then press the ENTER button.
3 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Press the EXIT button to exit.
➢
• When you make changes to Cell Light, Contrast, Brightness,
Sharpness, Color, or Tint the OSD will be adjusted accordingly.
• When in PC mode,
Tint, Sharpness and Color are not available.
• Each adjusted setting will be stored separately according to its input mode.
• Cell Light : Sets the pixel brightness; 10 being the highest setting.
• Contrast : Adjusts the contrast level of the picture.
• Brightness : Adjusts the brightness level of the picture.
• Sharpness : Adjusts the edge definition of the picture.
• Color : Adjusts color saturation of the picture.
• Tint : Adjusts the color tint of the picture by compensating the red and green
color.
PictureT V
Enter
Move
Return
Mode : Standard
►
Cell Light 7
Contrast 90
Brightness 45
Sharpness 20
Color 50
Tint G 50 R 50
Detailed Settings
►
Picture Options
►
Reset :OK
►
Contrast 80
Move Adjust
Return
Anynet
+
(HDMI-CEC)
Picture Mode
◄
Standard
►
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
MTS : Mono
TOOLS
Move
Adjust
Exit
Cell Light 7
Move Adjust
Return
PictureT V
Enter
Move
Return
Mode : Standard
►
Cell Light 7
Contrast 90
Brightness 45
Sharpness 20
Color 50
Tint G 50 R 50
Detailed Settings
►
Picture Options
►
Reset : OK
►
Mode : Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 20
Color 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
PictureT V
Enter
Move
Return
Dynamic
Standard
Movie
To Next Page
Loading...
