,
n
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
Result
: The Standby indicator on the front of the television
lights up.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the power button on the front of the television (or POWER
() button on the remote control) to switch the television on.
Result
: The programme that you were watching last is
re-selected automatically.
3 Press the numeric button ( ~ ) or P or button
on the remote control or
C/P.
button on the right side of
the panel.
➢
If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on page
17 or “Storing Channels Manually” on page 18.
3 To switch your television off, press the power button again.
Switching Your Television On and Off
English - 13
Front of the TV
Side of the TV
BN68-00889A-00Eng_01-53 4/15/05 1:49 PM Page 13
To Next Page
Loading...
