Samsung PS43F4500 - User Manual

Questions and Answers

G
Gregory WilliamsSep 12, 2025
Why did my Samsung Plasma TV turn on by itself?
- C
  cameronnelsonSep 12, 2025
  If you turned the Samsung Plasma TV off 45 minutes ago, and it turned on again, it is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV.
N
noahedwardsSep 12, 2025
Why the picture will not display in full screen on Samsung PS43F4500 Plasma TV?
- J
  jameswilkinsSep 12, 2025
  If the picture will not display in full screen on your Samsung Plasma TV: * HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. * Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. * Adjust the picture size options on your external device or TV to full screen.
J
Jennifer HallSep 9, 2025
How to program cable box remote to Samsung PS43F4500?
- D
  Derek MclaughlinSep 9, 2025
  If the cable/set top box remote control doesn’t turn the Samsung Plasma TV on or off, or adjust the volume, programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the SAMSUNG TV code.
K
kstevensSep 8, 2025
How to remove dotted line on the edge of Samsung PS43F4500 Plasma TV screen?
- S
  Sarah TrevinoSep 8, 2025
  If there is a dotted line on the edge of the screen of your Samsung Plasma TV: * If the picture size is set to Screen Fit, change it to 16:9. * Change cable/satellite box resolution.
T
tdicksonSep 7, 2025
Why does the picture freeze when changing channels on Samsung PS43F4500 Plasma TV?
- S
  Steven Garcia Jr.Sep 7, 2025
  If when changing channels on your Samsung Plasma TV, the picture freezes, is distorted, or delayed: * If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes. * Set the output resolution of the cable box to 1080i or 720p.
B
Belinda FordAug 23, 2025
What to do if Samsung Plasma TV will not turn on?
- A
  Alicia ReedAug 23, 2025
  If your Samsung Plasma TV won't turn on, ensure the AC power cord is securely plugged into both the wall outlet and the TV. Verify that the wall outlet is working. Also, try pressing the POWER button on the TV itself to rule out a remote control issue.
S
samuel83Sep 5, 2025
How to fix “Mode Not Supported” message on Samsung PS43F4500?
- M
  michael76Sep 5, 2025
  If a “Mode Not Supported” message appears on your Samsung Plasma TV, check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.
B
Benjamin MyersSep 4, 2025
How to fix wrong or missing colour on Samsung PS43F4500 Plasma TV?
- M
  martincorySep 4, 2025
  If the colour on your Samsung Plasma TV is wrong or missing, it may be due to incorrect or loose connections. If you’re using a component connection, make sure the component cables are connected to the correct jacks.
L
Lori OconnellSep 3, 2025
Why is my Samsung PS43F4500 Plasma TV making humming noise?
- J
  James MurilloSep 3, 2025
  If your Samsung Plasma TV is making a humming noise, it's typically normal. Plasma TVs typically make a soft humming sound caused by the electrical charges used to create the images on the screen. If the humming sound is loud, you may have set the brightness on the TV too high, so try setting the brightness lower. You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try rerouting your connection cables. Improper installation of wall mount can create excessive noise.
J
Jason NelsonSep 2, 2025
How to fix black and white picture on Samsung PS43F4500?
- Z
  zmoralesSep 2, 2025
  If the picture on your Samsung Plasma TV is black and white, and you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.