26
Connecting the touchscreen monitor
"
The supported ports may vary depending on the model.
Connecting to a PC
1
Connect your PC to the product using a HDMI or HDMI-DVI cable.
"
Use the appropriate cable for the port to connect to.
• Supported video ports: HDMI, DP(DisplayPort), DVI
Connecting the devices using a HDMI cable
HDMI IN
Connecting the devices using a HDMI-DVI cable
HDMI IN
2
Connect the power cable from the product to the power outlet.
3
Connect the TOUCH OUT port on the product to a USB port on the PC using the USB cable.
"
TOUCH OUT 1 operates when the current screen is set to HDMI 1, HDMI 2, DisplayPort, or
DVI.
"
TOUCH OUT 2 operates when the current screen is set to HDMI 3.
TOUCH OUT 1, TOUCH OUT 2
"
If touchscreen control is not available after the devices are connected
– Make sure to connect the HDMI or HDMI-DVI cable before connecting the USB cable.
– If touchscreen control is still unavailable after the cables are connected properly,
disconnect the USB cable and then connect it again.
To Next Page
Loading...
