72
Use WPS
How to set up using Use WPS
If your router has a Use WPS button, follow these steps.
1
Set Network Type to Wireless from the Open Network Settings page.
2
Select Use WPS, press E.
3
Press the WPS or PBC button on your wireless router withine the next two minutes. Your
product automatically acquires all the network setting values it needs and connects to your
network.
– If you want to use the WPS PIN, select WPS PIN.
Go to your wireless router's Settings, enter your PIN, and then select OK.
4
The network connection screen appears, and network setup is done.
Server Network Settings
MENU m→Network→Server Network Settings→ENTER E
Proxy server
Set up your proxy server connection and related functions.
Off / On
• Address / Port / ID / Password
"
Address / Port / ID and Password are enabled only when Proxy server is set to On.
Device Name
MENU m→Network→Device Name→ENTER E
Select or enter a device name.
This name can be shown on network device over the network.
• [Signage] Display1 ~ 6 / User Input
To Next Page
Loading...
