3-1
3. Disassembly and Reassemble
3. Disassembly and Reassemble
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
CAUTION
1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully.
- Use the Samsung Service tool to disassemble the cabinet
• Recommend to use the Samsung Service too
- Recommended Torque for Cabinet/Stand screws : 10 ~ 12kgf
• A strength of Torque can be changed depending on the situation.
3-1. TV Disassembly
Description & Screws Picture Description
1
Carefully position the TV so that the screen is
facing downwards.
• Make sure to place the TV upon a soft
cushion or any material that will prevent
damage to the screen.
2
To remove the 4 stands, turn outward to remove
as shown.
To Next Page
Loading...
