4-3. Video
4-3-1. Customer Picture
MAIN/T-CON BOARD
Main Section Pre-FRC (T-CON) Post FRC (T-CON) Results Problem
Picture Test
Do you still see the problem in the test photo?
Yes No Show Again
Pass Pass Pass
Picture Test
If the Self Diagnosis Picture Test is OK, your TV may not have a problem.
Please follow steps
below:
- Check your external devices and connections.
- Try picture reset by selecting Menu > Picture > Reset Picture.
- Update to the latest software version by selecting Menu > Support >
Software Update.
• Check Signal Source
and other inputs
Fail Pass Pass
Picture Test
Test 1 Test 2 Test 3
Fail Pass
-
• Replace Main/T-CON
Board
Fail Fail Pass
Picture Test
Test 1 Test 2 Test 3
Fail Fail Pass
• Replace Main/T-CON
Board
Fail Fail Fail
Picture Test Complete
Test 1 Test 2 Test 3
!
Failed
!
Failed
Pass
• Replace Main/T-CON
Board or Panel
4-6
4. Troubleshooting