4-8. Replacing Main Board
When replacing Main Board, certain values needs to be manually input in Factory menu to complete the replacement.
Steps to Replace Main Board
1. Enter Factory Menu (Use Factory Remote only).
• Power TV on : Select TV Source £ Info/Factory £ Option
2. Change Each value according to the TV Model.
• Type, Writing Type, Local Set, SW Model, Model Code must be set to correct value.
• Sample Model : QN55LS01RAFXZA
Type
• Check Panel label (located in the back chassis of panel) and choose same Type code from the list.
Home Updates Exit
55A1QU7QN 55L1QU7QN
75L1QU7QN 55A1QU8XN
55L1QU7QN 55A1QU7QN
65A1QU9TR 65L1MU9TN
65L1QU9TR 65L1QU7QN
65A1QU8XN 65L1QU8XN
55A6AU0NN 82A1QU9TR
55A1AU0RR
<Type list in the Factory Menu>
<Panel Label>
CY-RR055FGLV2V/H
*****(***)
**XX
2018.01.XX
55A1AU0RR
**XX
2019.0X.XX
55A1AU0RR
Factory Reset
Type 55A1AU0RR
Writing Type
Local Set US
SW Model LS01R
Model Code QN55LS01RAFXZA
TUNER -
Ch Table NONE
MRT Option
Production Option
Engineer Option
4-16
4. Troubleshooting
To Next Page
Loading...
