Writing Type
• For Quick Entry of Type.
1. Conrm Type from Option Byte Table for your TV.
2. Select Writing Type.
3. "Set Panel Type" appears.
4. Enter exact Model Type using cursors.
5. Select OK.
6. Writing Type Success appears in the Option Table.
- If the model Type you entered doesn’t exist it will not
load.
- If you entered over 10 digits an Information screen box is
full appears.
7. Complete rest of Option Byte Table info.
8. Press soft power off with remote to enter settings.
NOTE
When installing the ASSY PCB MAIN BOARD, verify the
board is properly positioned in all 4 mounting slots.
Home Updates Exit
<Set Writing Type>
<Writing Type digits exceeded>
<Writing Type Success>
Factory Reset
Type 55A1AU0RR
Writing Type
Local Set US
SW Model LS01R
Model Code QN55LS01RAFXZA
TUNER -
Ch Table NONE
MRT Option
Production Option
Engineer Option
Home Updates Exit
Factory Reset
Type 55A1AU0RR
Writing Type Success
Local Set US
SW Model LS01R
55A1AU0RR
Information
The box is full. You can't enter any more text.
OK
Local Set
• Set according to Local region(country).
4-17
4. Troubleshooting
To Next Page
Loading...
