3-6
3. Disassembly and Reassemble
Description & Screws Picture Description
• 55"
• Gently lift the
1
edge to unlock the SMPS
board.
2
Mounting slots (5EA)
Fixing Hole
1
Lift up (2EA)
Locking
Remove the board by holding it with both
hands and sliding it to the Right (
2
).
2
Slide to the Right to release the board
15
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
