Setting Option Bytes
1. Enter Factory Mode with Service Remote (only).
2. Check Option Byte Table located on GSPN (Fast Track or Tips).
3. Select Option.
4. Select each item to change.
5. Can Use new Writing Type to enter model (if entered wrong it will not change.)
6. Soft power TV Off to load.
Performing Factory Reset
1. Enter Factory Mode.
2. Select Option £ Factory Reset
3. TV will power off.
4. Perform ALL TV Settings. (New out of box condition)
First Screen Appearing in Factory Mode
• Sample :
9 Micom Version
9 Wired MAC Success
9 Model
9 T-CON
9 Dimming
9 FRC
9 Sub Micom
9 Tizen Platform info
9 BT Version
9 E-Manual
9 Blaster Version
9 E-Pop Version
9 EDID Success (Status)
9 HDCP Success (Status)
9 Wireless MAC Success
9 WiFi Version
9 Factory Data Version
9 EERC Version
9 Date of Purchase -
Initial set up date
(Resets with Factory
Reset)
9 CO Status ("O" Operational)
9 Testing Items
4-21
4. Troubleshooting
To Next Page
Loading...
