A message appears saying "Wireless One Connect is disconnected. when
viewing content provided by an external input source (e.g., a terrestrial
broadcast service, set-top box or game console).
The Wireless One Connect may be disconnected or turned off.
Check that the Wireless One Connect is not turned off. Turn it on and wait, then it will automatically connect.
If it is turned on but disconnected, navigate to the Adjust menu, and adjust the Wireless One Connect position until
the antenna icon colour becomes blue.
• left directional button Settings All Settings Connections Wireless One Connect Wireless
One Connect Status Adjust
It automatically connects when the signal strength is
A message appears saying "The signal strength is low. Adjust the location of
your Wireless One Connect." when viewing content provided by an external
input source (e.g., a terrestrial broadcast service, set-top box or game
console).
The wireless signal is weak between the screen device and Wireless One Connect.
Navigate to the Adjust menu, and adjust the Wireless One Connect position until the antenna icon colour becomes
blue.
• left directional button Settings All Settings Connections Wireless One Connect Wireless
One Connect Status Adjust
It automatically connects when the signal strength is
For more information on Wireless One Connect installation, refer to the "Restrictions when using Wireless One Connect."
- 242 -
To Next Page
Loading...
