55
TROUBLESHOOTING
1) For example, if you want to change freezer compartment standard temperature to 28.4 (-
2°C) by operating option, do as below.
This function is for changing the standard temperature.
In -2 (-19°C) of current temperature of freezer compartment, if you make the temperature
lower to 28.4 (-2°C) by the option, the standard temperature would be controlled -6 (-21°C)
Therefore, if you change the setting of temperature option to -2 (-19°C) on the panel, the
appliance will be operated with -6 (-21°C).
It means that standard temperature is controlled 28.4 (-2°C) less than setting temperature in
the display.
If the display changes to option setting mode, all displays will be off except freezer and
fridge compartments temperature display as below.
(Fresh food and freezer compartments case will be explained only because all options
are operated with the same method according to the option table.)
Basically, option function has cleared data at shipping process.
Therefore, almost all setting value are "0".
Check the product information manual or specifications because setting value could be
changed particularly for the purpose of improving product at mass producing process.
NOTE
To Next Page
Loading...
