Samsung RS20NCSW - Refrigerator Control Panel Display Guide; Setting Refrigerator Temperature Controls

22
99.. FFUUNNCCTTIIOONN AANNDD OOPPEERRAATTIIOONN
9-1. Panel Display
9-2. Temperature Control
FRE. TEMP. BUTTON
To set the freezer temperature, push the
button repeatedly to select a level between
1 level (cold) to 9 level (colder).
REF. TEMP. BUTTON
To set the refrigerator temperature,
push the button repeatedly to select a
level between 1 level (cold) to 9 level
(colder).
1) Freezer
• The freezer temperature can be set to a level
between 1 level (cold) to 9 level (colder).
• Push the FRE. TEMP. button repeatedly until the
desired level is reached.
- At each level, the LED lamps will turn on or off as
shown on the table.
2) Refrigerator
• The refrigerator temperature can be set to a level
between 1 level (cold) to 9 level (colder).
• Push the REF. TEMP. button repeatedly until the
desired level is reached.
- At each level, the LED lamps will turn on or off as
shown on the table.
• The higher level you set, the lower temperature inside the unit.
NOTE
LED
condition
●
(on)
○
(off)
◐ (blink)
Temp.
(about)
level 1 2 3 4 5 6 7 8 9
Fre
Ref
-16 ℃
6 ℃
-18 ℃
4 ℃
-20 ℃
3 ℃
-22 ℃
2 ℃
-25 ℃
1 ℃
cold normal colder
Control table
Reference
⑤
④
③
②
●
⑤
④
③
②
◐
⑤
④
③
●
●
⑤
④
③
◐
●
⑤
④
●
●
●
⑤
④
◐
●
●
⑤
●
●
●
●
⑤
◐
●
●
●
●
●
●
●
●
• For your convenience, your freezer/refrigerator controls have been preset at the factory. The
freezer/refrigerator control should both be set to normal (level 5) when you first install your
freezer/refrigdfator.
NOTE
After blinking ( ◐ ) for 3second, led turn on (
●
).