Samsung RS261M Series - Troubleshooting Common Issues; Problem-Solving Guide

28
3. DISASSEMBLY AND REASSEMBLY
Part name
Ice Maker Kit
Descriptive PictureHow To Do
1. Remove the screws.
2. Disconnect the ice maker wire connector.
3. Unlock the locking tabs to
separate the ice maker kit.
3-16) ICE MAKER KIT
Part name
Auger Motor
Case
Descriptive PictureHow To Do
This shelf is designed to
support the ice maker & ice
dispensed and Xtra Space
TM
.
1. Remove the Xtra Space
TM
cover (push it down and pull
front).
2. Slide the partition out.
3. Remove the screws (2) on
the bottom front of the case.
4. Slide out the case while
disconnecting the wire
connect.
3-17) AUGER MOTOR CASE