Samsung RS261M Series - 4-7) Table of Set Point Shift Function; 4-8) Set Point Shift Function

< Reference Bar Display Binary Table>
4-7) Table of Set Point Shift Function
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Display On
X X X X X X X X X X X X X X X X X X X
Display On
X X X X X X X X X X X X X X X X X X X
Display On
X X X X X X X X X X X X X X X X O O O
Display On
X X X X X X X X O O O O O O O O X X X
Display On
X X X X O O O O X X X X O O O O X X X
Display On
X X O O X X O O X X O O X X O O X X O
Display On
X O X O X O X O X O X O X O X O X O X
CODE
LED
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Display On
X X X X X X X X X X X X X X X X X X
Display On
X X X X X X X X X X X X X O O O O O
Display On
O O O O O O O O O O O O O X X X X X
Display On
X X X X O O O O O O O O O X X X X X
Display On
X O O O O X X X X O O O O X X X X O
Display On
O X X O O X X O O X X O O X X O O X
Display On
O X O X O X O X O X O X O X O X O X
CODE
LED
39
4. TROUBLESHOOTING
1) Initially, the code is set to “0”.
2) After 20 seconds from adjustment, a new setting will be stored in EEPROM and display will return to
normal.
3) Freezer Temp, Fridge Temp, Ice maker water supply, Ice tray temperature, can be adjusted with this
function.
Press both buttons simultanequsly for 12 seconds
4-8) Set Point Shift Function
●
Press Freezer Temp. and Energy Saver(Vacation) buttons simultaneously for 12 seconds to
get into this mode.
●
In this mode, only the display LEDs for temperature will be ON.