5
1. PRECAUTIONS(SAFETY WARNINGS)
Pull the power plug out before
attempting to exchange the
interior lamp of the refrigerator.
●
This will prevent danger of electric
shock.
Warning & Caution
Unplug
Use only rated components for
replacement.
●
Check the correct model, rated
voltage, rated current, operating
temperature.
Before repair, make sure that the
wires such as harness are bundled
tightly.
●
Bundle wires tightly so that they
are not detached easily and get wet.
Check if there is any trace indicating
the permeation of water.
●
If there is that kind of trace, change
the related components or do the
necessary treatment such as taping
using the insulating tape.
After repair, check the
assembled state of components.
●
It must be in the same assembled
state as before disassembly.
When repairing, completely remove
dust and foreign substances from
housing, wiring, joint etc..
●
It may prevents fire due to tracking
or short.
Rated
components
When installing, servicing, or
cleaning behind the refrigerator, be
sure to pull the unit straight out and
push back in straight after finishing.
Also, make sure your floor supports
the full-load refrigerator. Otherwise, it
may cause floor damage.
CAUTION
To Next Page
Loading...
