Checking the Dimensions of your Entrance Door
Check the dimensions of your entrance door to determine whether the refrigerator can pass
through it.
RS265/RS267/RS269
Dimension
(inch)
Model
Capacity (Cu. Ft)
Width
Case Height
Depth
without Hinge
with Hinge
with door
withoutdoor
26.1
36"
69"
70"
30"
Selecting the Location for the Refrigerator
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Select a location with level floor or close to it.
(If not, the water supply line can be damaged.)
• See !!Separating the water supply line from the refrigerator'!on the next page.
Allowsufficientspace to circulatethe air inthe internalcooling system.
• When the refrigeratordoes nothave enough space, the internalcooling system may not work correctly.
4inches
O.1inch
2inches
• Allow clearance to the right left, back and topwhen insta ling the refrigerator.
This has the advantage of reduc ng pOwerconsumptionl
, Do not install the refrigerator where the temperature will go below 50°F(10°C)I
17
To Next Page
Loading...
