Reattaching the Freezer Door
1) Insert the lower hinge (@_)in the bracket lower
hinge (@).
2) Reattach the freezer door by inserting the hose
(@) in the lower side of the door into the hole in
the lower hinge (@)and pulling the hose down.
3) Insert the upper hinge shaft (®) into the hole (@).After levelling between the upper hinge hole (®) and
the hole of the cabinet (@).reattach hinge screws (@)and ground screw (®) in a clockwise direction.
4) Connect the wires. 5) Put the front part of the upper hinge cover (@) on
the front part of the upper hinge (@) and reattach
from the front part of the upper hinge cover first.
21
To Next Page
Loading...
