Samsung RS267LABP/XAA - Adjusting the Clearance between the Doors

t.__.5T" AdjustLevelingfirst
NOTE
Making small adjustments between doors.
If the door of the freezer is lowerthan that ofthe If the door of freezer is higherthan that of the
refrigerator, refrigerator.
/.-
Adjustment
Please open the doors and adjust them as follows:
1) Release the nut (_)) on the lower hinge until it reaches the upper end of the bolt (@).
f_
_djustment part
NOTE
when you release the nut((#)i use enclosed heXWrench (@)to turn the bolt(@)in a slightly
counterclockwise direction. This will enable you to loosen the nut((#)with your fingers.
,;, WRENCH
,_ WRENCH
4-,NUT
(!, NUT (2,BOLT ,'2,BOLT
2) Pleaseadjustthe heightdifference betweenthe doorsby turning the bolt ((2>)clockwise ( -'_-,,,* ) or counter
clockwise( _ ).
Q= when you turn €lockwise (_)i the door goes
NOTE
f
,_ WRENCH ,;, WRENCH
'x
(!' NUT ..........
d, NUT
,_2,BOLT ,_2,BOLT
3) After adjusting the doors, turn the nut in clockwise ( _ ) until itreaches the lower end ofthe bolt, then
tighten the bolt again with the wrench (®) to fixthe nut(@).
f
,_, WRENCH ,_,WRENCH
(!, NUT (!, NUT
,'2,BOLT (2",BOLT
If you do not fix the nut (@)firmly, the bolt (@)may be releaSed.
NOTE
25