Make sure the refrigerator is level before adjusting its doors.
The doors will be uneven if the refrigerator is not level.
(_ Thefront of refrigeratorisadjustablel
NOTE
Case 1) Freezer door is lower than Insert a flat-blade screwdriver (-) (dP)into a slot of
that of the refrigerator the control lever (@),turn it clockwise and level the
refrigerator.
(_ DRIVER()
@ CONTROL LEVER
Case 2) Freezer door is higher than
that of the refrigerator
i.-
NOTE
Insert a flat-blade screwdriver (-) (_) into a slot of
the control lever (@),turn it clockwise and level
the refrigerator.
(_ DRIVER(-)
...j
........,"
@ CONTROL LEVER
DOnot make small adjustments with the control lever, Please refer tOthe next pagel
24
To Next Page
Loading...
