Chapter 2. Safety 2 - 11
(IEC 60601-1-1/EN 60601-1-1). When connecting a peripheral to the signal input or
output port of medical equipment, you must make sure that the peripheral complies
with the IEC 60601-1-1/EN 60601-1-1 specification.
WARNING
■ Electric shocks may result if this system, including all of its
externally mounted recording and monitoring devices, is
not properly grounded.
■ Never open the cover of the product. The interior of this
product contains dangerous high-voltage electricity. All
interior servicing of the product or replacement of parts
must be performed by Samsung Medison.
■ Always check the product's housing, cables, cords, and
plugs before using the product. Disconnect the power
source and do not use the equipment if the housing is
damaged (for example cracked or chipped), or if the cable
is worn.
■ Always disconnect the system from the wall outlet prior to
cleaning the system.
■ All equipment that comes in physical contact with the
patient, such as probes and ECG leads, must be detached
from the patient prior to using high-voltage defibrillator.
■ Never use the product in the presence of flammable or
anesthetic gas. There is a risk of explosion.
■ Avoid installing the system in such a way that it is difficult
for the operator to disconnect it from the power source.
■ Do not use together with HF surgical equipment. HF
surgical equipment may be damaged, which may result in
fire.
■ The System must only be connected to a supply mains
with protective earth to avoid risk of electric shock.
To Next Page