Chapter 3. Installing the Product 3-17
System Settings
This mode is used for system settings. It does not affect image output. The setup
may be modified depending on specific needs or preferences.
1. Tap the Setup button on the touch screen.
2. The Setup screen will appear on the monitor and the touch screen. Select
a tab that has items to specify.
※ Selecting a tab
You can select a desired tab in either one of two ways. Select the
method that suits you.
- Use the trackball and the Set button to select a tab.
- Tap a corresponding button on the touch screen.
3. Specify settings for each item.
4. Save and close the settings. Click OK on the monitor screen, or tap Exit
on the touch screen, or press Exit button on the control panel to switch to
Scan mode.
5. Tap Return on the touch screen to go back to the Utility screen.
[Figure 3.5 Setup - Touch Screen]
To Next Page