2 - 12 RS80A Service Manual
CAUTION
■ The system has been designed for 100-240VAC; you
should select the input voltage of any connected printer
and VCR. Prior to connecting a peripheral power cord,
verify that the voltage indicated on the power cord
matches the voltage rating of the peripheral device.
■ An isolation transformer protects the system from power
surges. The isolation transformer continues to operate
when the system is in standby.
■ Do not immerse the cable in liquids. Cables are not
waterproof.
■ The auxiliary socket outlets installed on this system are
rated 100-240VAC, with a maximum total load of 150VA.
Use these outlets only for supplying power to equipment
that is intended to be part of the ultrasound system. Do not
connect additional multiple-socket outlets or extension
cords to the system.
■ Do not connect any peripheral devices that are not listed in
this operation manual to the auxiliary socket outlet of the
system. Doing so may cause an electrical hazard.
■ Do not touch SIP/SOP and the patient simultaneously.
There is a risk of electric shock from leakage current.
ECG-Related Information
WARNING
■ This product does not provide an ECG monitoring function.
Therefore, it does not recognize unsuitable ECG signals.
■ Do not use ECG electrodes for HF surgical equipment. HF
surgical equipment may be damaged, which may result in
fire.
■ Do not use ECG electrodes during cardiac pacemaker
procedures or any procedures that involve other types of
electrical stimulators.
■ Do not use ECG leads and electrodes in an operating room.
To Next Page