Chapter 3. Installing the Product 3-5
Unpacking the Product
Dismantling the Product Box
1. Dismantle the box.
2. Remove the protection cover.
3. Take out the probe box and accessory box and store them in a safe place.
4. Unlock the brakes on wheels.
5. Grab the rear handle on the product and move it to a place to install.
[Figure 3.1 Dismantling the Product Box]
Accessories
A box containing various accessories is supplied with the product. If it is not
consistent with your order, please contact the Samsung Medison customer service
department or your local vendor.
To Next Page