38
Enabling PC or AV mode
-
After changing the PC/AV mode, the monitor may need to be calibrated again.
-
To calibrate the monitor again, refer to "Calibration" on page 25.
Enable PC or AV mode according to the source device connected to the product.
―
Press one of the four buttons, other than the power button, found at the bottom right front of the product. The key guide
will appear.
1
Tap the button from the key guide.
2
Go to using the buttons, and tap .
3
Go to the desired option using the buttons, and tap .
: Enable PC mode. This mode is suitable for a PC.
: Enable AV mode to enlarge the image size displayed on the product. This mode is suitable when viewing
movies.
4
Changes are applied and the OSD menu is closed.
Adjusting the volume
100
Adjust the volume as follows.
―
Press one of the four buttons, other than the power button, found at the bottom right front of the product. The key guide
will appear.
1
Tap the button from the key guide.
2
Tap .
3
Adjust the volume using the buttons, and tap .
4
Changes are applied and the OSD menu is closed.
To Next Page
Loading...
