14
Adjusting the Product Tilt and Height
―
The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
S57CG95*N
-15.0° (±2.0°) ~ 15.0° (±2.0°)
-3.0° (± 2.0°) ~ 10.0° (± 2.0°)
120.0 mm (±5.0 mm)
S49CG93*S
-2.0° (±2.0°) ~ 15.0° (±2.0°)
120.0 mm (±5.0 mm)
• The product tilt and height can be adjusted.
• Hold the top centre of the product and adjust the height carefully.
• When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
To Next Page
Loading...
