39
2nd 3rd Description
Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.
―
If the product is off or in DPMS mode and the power LED is kept on or off for 10 to 15 minutes, Panel Care mode is running. (S49CG93*S model only.)
Setup Custom Key Set the custom key so that your chosen function can be set up directly.
• Eye Saver Mode / PIP/PBP / Switch USB / Refresh Rate / Black Equalizer / Virtual Aim Point / Infinity Core Lighting / Auto Source Switch+ /
Picture Mode / Response Time
―
S57CG95*N model only.
• Eye Saver Mode / PIP/PBP / Low Input Lag / Black Equalizer / Virtual Aim Point / Infinity Core Lighting / Auto Source Switch+ / Picture Mode
―
S49CG93*S model only.
VRR Control By optimising the video signal processing, this additional function mitigates screen flicker.
While playing any game or content that causes screen flicker, use the VRR Control function with setting it to On.
―
S49CG93*S model only.
Best Brightness Optimises brightness in real time, based on your lighting environment.
―
S57CG95*N model only.
Minimum Brightness Set the minimum brightness for Monitor screen. This function only works if its value is lower than the value set in the Picture menu’s Backlight
setting.
―
This option is available when Best Brightness is set to On.
―
S57CG95*N model only.
To Next Page
Loading...
