EasyManua.ls Logo

Samsung SCD-2020 - Motion Detection Setup; Privacy Masking Setup

Samsung SCD-2020
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COLOR DOME CAMERA User Guide
28
COLOR DOME CAMERA User Guide
29
• Press the Function Setup switch.
You can select a desired phase from 0 to 359 when select 'phase'.
•WhenusingACpowerat60Hz(NTSC),50Hz(PAL)frequency,youcanusetheL/L
typesynchronization.
•WhenthepowerisDC12V,theSYNCmenuisfixedtothe‘INT’mode.
Notes
Operating Your Camera
MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the screen,
and the words 'MOTION DETECTED' appear on the
screen when movement is detected. You can monitor
activity more efficient.

When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates 'MOTION DET'.

Set up the mode using the Function Setup switch.
-SENSITIVITY:Youcanselectupto8 MDareas.WhenSENSITIVITYnumberishigh,
motion detection sensitivity is increased to recognize even small
movement.
-AREAMODE:DetermineswhethertousetheMDareaselectedinSENSITIVITY.
-SELPOS:Determineswhichofthe4verticesofeachMDareaistobeused.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- FILL SET :
Fills in a selected MD area. The color of filling is sequentially selected as brown,
orange, blue, cyan, green, yellow, magenta and red.
-RETURN:
Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
•MOTIONDETareasshowonlyMOTIONDETmenu.Therefore,MOTIONDETareasdon’t
display on the monitor screen.
Notes
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA AREA1
2. MODE OFF
3. MASK COLOR GREEN
4. MASK TONE 1
5. TOP 39
6. BOTTOM 79
7. LEFT 13
8. RIGHT 52
9. RETURN
1) When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates ‘PRIVACY’.
 2) Set up the mode using the Function Setup switch.
-AREA :Youcanselectupto12PRIVACYareas.
-MODE :DetermineswhethertousetheareaselectedintheAREA.
-MASKCOLOR :Determineareacolor.YoucanselectGreen,Red,Blue,Black,White,
Gray.
-MASKTONE :AdjustthebrightnessofMASKCOLOR.
-TOP/BOTTOM/LEFT/RIGHT:Adjustthesizeandpositionoftheselectedarea.
-RETURN :Selectthisto save thePRIVACY menusettings and returnto the
SPECIAL menu.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
Resets the camera settings to the factory defaults. Language is not initialized.
•AstheDISfunctionusesthedigitalzoom,thecamera'sresolutionwilldecrease.
•DISdoesn’toperatewhenbackgroundilluminationistoolow.
•DISdoesn’toperatewhenobjectpatternismonotonicaslikeskyorwhitewall.
Notes

Related product manuals