[ ENGLISH ]
Preparation
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.
The hand strapenables you to :
- Hold the camcorder in a stable, comfortable position.
- Press the Zoom and START/STOPbutton without havingto change the position of your hand.
a, Pull open the Hand Strap cover and releasethe Hand Strap.
b. Adjust its lengthand stick it back onto the Hand Strap cover,
c. Close the Hand Strap cover again,
The Shoulder Strap enables you to carry your camcorder around in complete
safety,
1. Insertthe end of strap intothe Shoulder Strap hook on the camcorder,
Insert the other end of strap into ring inside hand strap,
2. Thread each end into the buckle,adjust the length of the strapand then
pull it tight in the buckle.
A
To Next Page
Loading...
