Preparation
[ENGLISH I
There are two types of powersource that can be connected to your camcorder.
- The AC PowerAdapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording,
1. Connect the AC Poweradapter to the AC cord.
2. Connect the AC cord to a wall socket.
The plug and wall socket type may differ accordingto
your resident country.
3. Connect the DOcable to the DC jack socket of the
camcorder.
4. Set the camcorderto each mode by holding down the tab
on the powerswitch and turning it to the CAMERA or
PLAYER mode.
_, if you want to use this unit as a camcorder, set the mode switch to TAPE position.
_, If you want to use this unit as a DSC (Digital Still Camera). set the mode switch to
MEMORY STICK position.
To Next Page
Loading...
