I ENGLISH
Basic Recordin l
_, Youcan adjust the LCD during playback.
_, The adjustment methodisthe same procedureas used in CAMERA mode. (see page 31)
The Speakerworks in PLAYER mode only.
• When you use the LCD screen for playback,you can hear therecorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
- Take the following steps to lowerthe volume ormute the sound while playing a tape
on the camcorder.
1. Set the powerswitch to PLAYERmode.
2. Press )411(PLAY/STILL)to playthe tape.
3. When you hear sounds once the tape isin play,usethe MENU DIAL to adjust the volume.
• A volume level displaywill appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19and you will not hear
any sound when the volume is set on00.
• If you closethe LCD while playing,you will not hear sound from the speaker.
• When thecable is connected tothe NV jack,you cannot hear sound from the speaker and
cannot adjust the volume.
• Youcan hear soundfrom speaker by removingthe connected cable from the AN jack
<3.2>
0_2_ _7
To Next Page
Loading...
