Basic Recordin l
[ENGLISH I
•l, You can monitorthe playbackpicture on the LCD monitor.
•l, Make sure that the battery pack is in place.
1. Hold down the powerswitch tab and turn it to the PLAYERposition.
2. Insert the tape youwish to view.(see page 27)
3. Open the LCD screen.
Adjust the angle of the LCD screen and set the brightnessor color if necessary.
4. Press the _ (REW) button to rewind the tape to the starting point.
• To stop rewinding, press the ==(STOP) button.
• The camcorder stops automatically after rewinding iscomplete.
5. Press the !_/11(PLAY/STILL)button to start playback.
• You can view the picture you recorded on the LCD.
• To stop the PLAY operation, press the ==(STOP)button.
• You can also view the picture on aTV screen, after connectingthe camcorder to a TV or VCR. (see page 68)
• Variousfunctions are available in playback mode.(see page 70)
To Next Page
Loading...
