Advanced Recording
[ENGLISH]
1. Press the PHOTO button and hold it.
• The still picture appears on the LCD monitor,
• If you do not wish to record, release the button,
2. Release the PHOTO button and pressthe PHOTO button againin 2 seconds.
• The still picture is recorded for about 6-7 seconds.
3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
The PHOTO SEARCH works in PLAYERand MPLAY mode only.
1. • Press the MENU button. (or press the PHOTO SEARCH button on the remote control.)
• The MENU listwill appear.
2. Turn the MENU DIALto highlight AN.
3. Press the ENTER button to enter the sub-menu.
4. Select PHOTO SEARCH from the sub-menu and press the ENTER button.
5. Search the PHOTO using the _ (FF) and _1(REW) buttons.
• The PHOTO search process appears on the LCD while you are searching.
• After completing the search, the camcorder displaysthe still image.
6. To exit.press the • (STOP) button.
_N_TIAL
To Next Page
Loading...
