Samsung SCD23 - Page 87

Digital Still Camera mode
[ENGLISH I
4, Youcan select the quality of a still image to be recorded.
1. Set the mode switch to MEMORY STICK.
2. Set the power switchto the CAMERA mode.
3. Press the MENU button.
• The menu list willappear.
4. Turn the MENU DIALto highlight MEMORY.
5. Press the ENTER button to enter the sub-menu.
6. Turn the MENU DIALto highlight QUALITY inthe submenu.
7. Press the ENTER button.
8. Using the MENU DIAL, select the imagequality.
• Press the ENTER button to confirm the image quality.
• If you exit the sub-menu without pressing the ENTER button,
the quality mode is not changed.
9. To exit,press the MENU button.
i
[] []
_MEMORYSET _MEMORYSET
P_oToQUALrTY
PRINT MARK _ .............. _0_0
_PROJECT
F_NE ......................... F
I_F_LE NO ...................... SER_ES _ NORMAL ..................... N
DELETE
I_FORMAT
QUALITY 8MB 16MB
SUPER FINE Approx.60 Approx.120
FINE Approx.120 Approx.240
NORMAL Approx.240 Approx.480
- The actual number that you can record varies depending on the imagesize.
,,&