G
ETTING
S
TARTED
1.10
Setting the Dial Mode
You can select the type of the telephone dial system where your
machine is connected.
NOTE:
The Dial Mode setting may be unavailable depending on
your country.
1
Press Menu until “Machine Setup” appears on the top line
of the display.
2
Press the scroll button (
¦
or
) until you see “Dial Mode”
on the bottom line and press Enter.
3
Press the scroll button (
¦
or
) to select the desired dial
mode.
Select “Tone” if your machine is connected to a tone dial
line.
Select “Pulse” if the machine is connected to a pulse dial
line.
4
Press Enter to save the selection.
5
To return to the standby mode, press Stop/Clear.
To Next Page
Loading...
