G
ETTING
S
TARTED
1.11
1
Using the Toll Save Mode
Using the Toll Save button on the control panel, you can quickly
set your machine to send the document(s) stored in the memory
during the preset time slot, when the call charge is lowered. This
Toll Save mode helps you to take advantage of lower long
distance rates at night, for example.
NOTE
: The toll-saving time slot may vary depending on your
contract with a long distance phone company.
To turn the toll save mode on:
1
Press Toll Save. The button backlight turns on.
2
Press Enter when “Start Time” displays on the bottom line.
3
Enter the time when your machine starts sending toll save
faxes, using the number keypad.
To select “Am” or “Pm” for 12-hour format, press the or
button.
4
Press Enter when the start time on the display is correct.
5
Press the scroll button (
¦
or
) to display “End Time” and
press Enter.
6
Enter the time when the toll save transmission ends, using
the number keypad.
7
Press Enter to save the setting.
8
To return to the standby mode, press Stop/Clear.
Once the toll save mode is activated, your machine stores all of
the documents to be faxed into the memory and sends them at
the programed time.
NOTE:
You can change the toll-saving time in the
Advaced Fax
menu. See page 5.5.
To turn the toll save mode off, press Toll Save again. The button
backlight turns off and the mode is deactivated.
To Next Page
Loading...
