Samsung SCX-6322DN - Chapter 9 USING YOUR PRINTER with a MACINTOSH; Installing Software for Macintosh

Using Your Printer with a Macintosh
38
9 Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
N OTE : Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
•Printing
•Scanning
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
1 Connect your machine to the computer using the USB
cable or the Ethernet cable.
2 Turn on your computer and the machine.
3 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
4 Double-click the Samsung MFP on your Macintosh
desktop.
5 Double-click the MAC_Installer folder.
6 Double-click the MAC_Printer folder.
7 For Mac OS 10.3 or higher, double-click the Samsung
MFP Installer OSX
icon.
8 Click Continue .
9 Click Install .
10 After the installation is finished, click Quit .
Uninstalling the printer driver
1 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2 Double-click CD-ROM icon that appears on your
Macintosh desktop.
3 Double-click the Samsung MFP on your Macintosh
desktop.
4 Double-click the MAC_Installer folder.
5 Double-click the MAC_Printer folder.
6 Double-click the Samsung MFP Installer OSX icon.
7 Select Uninstall from the Installation Type and then Click
Uninstall .
8 Click Continue .
9 When the uninstallation is done, click Quit .