English _29
CONNECTING WITH OTHER DEVICE
Adjusting the Camera Bracket
1. Choose an installation site that can sufficiently support the weight of the equipments to be installed.
2. Attach the camera bracket to the wall using the supplied screw
s.
• SEB-1020R : (M3.5 X L25). 3.5 X 25
• SEB-1005R/1007R : (M4 x L15). 4x15
3. Adjust the camera to target the video location and tighten the camera bracket handle on the camera
bracket. Install the camera on to the male screw of the camera bracket by rotating the camera clockwise.
4. Loosen the handle by turning it counter clockwise and then adjust the camera position. Tighten the
handle, turning it clockwise to lock the camera in position.
5. Connect the camera cable to the camera.
Handle
Handle
Handle
To Next Page
Loading...
