Playing back messages
When there are messages waiting to be heard, the
Answer
button flashes and the display shows that you have new
messages, for example,
New: 1 ICM: 3
. (‘
New: 1
’ indicates there’s one new message, and ‘
ICM: 3
’ says that
there are three incoming messages recorded in total.)
Playing back newly received caller messages
Simply press
Play/Record
.
• The machine briefly displays recorded time then starts to play the message. This procedure is repeated for all NEW
messages.
• When the display reads
50s(01/03)
, ‘
01
’ is the number of the caller message currently being played and ‘
03
’ is
the total number of new caller messages in memory. ‘
50s
’ is the play back time for the message currently playing.
This time counts down as the message plays back.
Playing back all messages
Press and hold
Play/Record
until you hear a beep.
• All the messages are played back. The display briefly shows recorded time of each message, then plays ALL the
messages recorded.
• When the display reads
50s(01/03)
, ‘
01
’ is the number of the caller message currently being played and ‘
03
’ is
the total number of caller messages in memory. ‘
50s
’ is the play back time for the message currently playing. This
time counts down as the message plays back.
• Press
Stop/Cancel
or
Play/Record
to stop before the last message. While the message is playing back, the display
shows a variety of useful information.
Skipping backward or forward
To skip backward
Press |<<(1) while listening to the message.
• If you press |<<(1) while playing back the message, the machine will replay it.
• The machine skips back to the previous message and plays it if you press |<<(1) twice.
To skip forward
Press >>|(3) while listening to a message.
• The machine skips forward to the next message and plays it.
• If you press >>|(3) while playing the last message, the machine beeps and returns to the Standby Mode.
To Next Page
Loading...
Need help?
General
