Samsung SGH-P310 - Page 118

Menu functions
116
Creating a WAP profile
1. Press < New >. If a profile has already been
saved, press <
Options > and select Add
new connection
.
2. Select
WAP settings , if applicable.
3. Specify profile parameters:
•
Profile name : enter a profile name.
•
Homepage URL : enter the URL address
of the page to be used as your
homepage.
•
Proxy : activate or deactivate the proxy
server.
•
IP address : enter the IP address of the
proxy server.
•
Port : enter the port number of the proxy
server.
•
Linger time : set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
•
DNS : activate or deactivate the DNS
(Domain Name Server) addresses.
•
DNS 1 and DNS 2 : enter the primary and
secondary DNS addresses.
•
Bearer : select the network bearer type.
•
Advanced settings : change the
advanced options. Depending on the
bearer setting, available options vary.
When the bearer is set to
GPRS :
APN : enter the access point name.
Login ID : enter the login ID.
Password : enter the login password.
When the bearer is set to
GSM :
Your phone is set by default for connecting to
the network. If you change the settings without
first checking with your service provider, the
web browser, MMS, and e-mail features may not
work properly.