Menu functions
80
•
Email accounts
: set up an e-mail account
and select an account to be used.
Current account
: check or select an
account.
Account settings
: configure e-mail
accounts using different e-mail servers. Set
the options for each account:
-
Account name
: enter a name for the
currently selected account.
-
User name
: enter a user name.
-
Email address
: enter your e-mail
address.
-
SMTP server
: enter the IP address or host
name of the outgoing e-mail server.
-
SMTP port
: enter the SMTP port number.
-
Connect to POP3
server first
/
Connect
to IMAP4 server first
: connect to the
POP3 or IMAP4 server before connecting to
the SMTP server to send e-mails.
-
Protocol type
: select the protocol for the
incoming e-mail server. The remaining
options depend on the protocol type
setting.
When the protocol type is
POP3
:
-
POP3 server
:
enter the IP address or host
name of the server that receives your
e-mail.
-
POP3 port
: enter the POP3 port number.
-
User ID
: enter the POP3 user name.
-
Password
: enter the POP3 password.
-
Use SMTP authentication
: enable SMTP
authentication, which requires the user to
login before sending e-mails.
-
Same as POP3
: select if you want the
SMTP server to have the same parameters
as the POP3 server.
-
SMTP user ID
: enter the SMTP user
name.
To Next Page
Loading...
