Samsung SL-M4580FX - Adjustment

4.Troubleshooting
4.5.5.4.Adjustment
PrintAdjustment
•Diagnostics>Adjustment>PrintAdjustment>AutomaticAdjustment
PurposeTocalibrate/adjustthelengthsofvertical&horizontalimageandimagepositionautomaticallyin
printengine.
OperationProcedure
1)Press“PaperSupply”buttonandselectatray.
2)Press“PaperSize”buttonandselectapapersizeofthepreviouslyselectedtray.
3)Press“Print”button.Atestpatternwillbeprintedout.
4)Placetheprintedpatternonplaten.
•Thewords“frontside”onthechartfacetheglass
•Thearrowsfaceleftedgeoftheplaten
•Press“Scan1”
5)Placetheprintedpatternonplaten.
•Thewords“backside”onthechartfacetheglass
•Thearrowsfaceleftedgeoftheplaten
•Press“Scan2”
6)Press“OK”button.Automaticscanningwilloccur.
7)LocatethebacksideofScannerA/SChartatthescannerglassagainandpress“OK”button
oncemore.
8)Thesystemwillautomaticallycalculatethepropervaluebasedonscanningresultofthe
testpattern.
9)Thenewvaluesaresettothesystem.
4-41Copyright©1995-2013SAMSUNG.Allrightsreserved.