To Next Page
S
sabrinaleeAug 16, 2025
What to do when my Samsung Copier stops due to a major error?
- JJeremiah KingAug 16, 2025
If your Samsung Copier has stopped due to a major error, check the display message for more information.
What to do when my Samsung Copier stops due to a major error?
If your Samsung Copier has stopped due to a major error, check the display message for more information.
What to do if my Samsung SL-X7500LX Copier shows a minor error?
If your Samsung Copier shows a minor error and is waiting for it to be cleared, check the display message. Once the problem is resolved, the machine will resume its original task.
What to do if toner, imaging unit, or waste toner container is near end of life in Samsung Copier?
If your Samsung Copier indicates that the toner cartridge life, imaging unit, or waste toner container is near the end of its life, order a new toner cartridge, imaging unit, or waste toner container.
How to fix paper jam inside Samsung Copier (Jam feed 3, Jam feed 4)?
To resolve a paper jam inside your Samsung Copier (Jam feed 3, Jam feed 4), open the right bottom door of the dual cassette feeder and gently pull the jammed paper straight out. Then, close the dual cassette feeder right bottom door.
How to resolve paper jam in the multi-purpose tray of my Samsung Copier?
If there's a paper jam in the multi-purpose tray of your Samsung Copier, and the paper is not feeding properly, pull the paper out of the machine. Then, open and close the front door to resume printing.
How to clear original paper jam in front of scanner of Samsung Copier?
If you encounter an original paper jam in front of the scanner of your Samsung Copier, follow these steps: 1) Remove any remaining pages from the ADF. 2) Open the ADF cover. 3) Gently remove the jammed paper from the ADF. 4) Close the ADF cover.
How to clear original paper jam inside scanner of Samsung SL-X7500LX Copier?
If you encounter an original paper jam inside the scanner of your Samsung Copier, follow these steps: 1) Remove any remaining pages from the ADF. 2) Open the ADF cover. 3) Gently remove the jammed paper from the ADF. If you do not see paper in this area, go to the next step. 4) Open the input tray. 5) Pull the jammed paper gently out of the ADF. If you do not see paper in this area, go to the next step. 6) Close ADF cover and ADF input tray.
What to do if the fuser area is hot when removing paper from my Samsung SL-X7500LX Copier?
If the fuser area of your Samsung Copier is hot, exercise caution when removing paper from the machine. Gently pull the jammed paper straight out.
What to do if my Samsung Copier says there is no paper?
If your Samsung Copier indicates that there is no paper in the tray, load paper into the tray.
What to do if the door of my Samsung SL-X7500LX is open?
If the door of your Samsung Copier is open, close it.
General