To Next Page
E
Erin DavisSep 23, 2025
How to fix PoE source too low (802.3at 25.5W) on Samsung SLS-BU10G?
- Bbrandon25Sep 23, 2025
If the PoE source is too low (802.3at 25.5W) on your Samsung Extender, use a PoE source port providing 55W or more.
How to fix PoE source too low (802.3at 25.5W) on Samsung SLS-BU10G?
If the PoE source is too low (802.3at 25.5W) on your Samsung Extender, use a PoE source port providing 55W or more.
What to do if my Samsung Extender has a power fail?
If your Samsung Extender is experiencing a power failure, check that your power supply is stable.
How to fix a clock fail on my Samsung SLS-BU10G Extender?
If the Samsung Extender clock fails while using GPS, make sure the GPS antenna is near a window. If reception doesn't improve, consider buying and installing an external outdoor antenna. Also, check your firewall settings.
What to do if my Samsung Extender disk is full?
If you receive a temporary disk usage alert on your Samsung Extender, it should clear itself. If it persists, check the number of users in the 'Connected Devices' tab.
What to do if my Samsung Extender memory is full?
If you receive a temporary memory usage alert on your Samsung Extender, it should clear itself. If the alert persists, check the number of users in the 'Connected Devices' tab.
How to fix PoE source too low (802.3af 15.4W) on Samsung SLS-BU10G Extender?
If the PoE source is too low (802.3af 15.4W) on your Samsung Extender, use a PoE source port providing 55W or more.
How to fix function fail on Samsung SLS-BU10G Extender?
To fix a function failure on your Samsung Extender, restart your device.
What to do if function fail persists on Samsung SLS-BU10G Extender?
If your Samsung Extender is experiencing function failure for more than 1 hour, make sure the GPS antenna is near a window. If repositioning doesn't help, consider buying and installing an outdoor GPS antenna.
What to do if the TOD message is missed on my Samsung SLS-BU10G Extender?
If the TOD message is missed on your Samsung Extender, verify if the GPS antenna is properly installed.
What to do if the frequency holdover is exceeded on my Samsung SLS-BU10G?
If the frequency holdover is exceeded on your Samsung Extender, make sure the GPS antenna is near a window. If repositioning doesn't help, consider purchasing and installing an external outdoor antenna.
Outlines the main technical characteristics of the Network Extender.
Instructions for physically installing the device on walls or ceilings.
Details PoE power, RF antenna ports, LAA, and extension cables.
Details the login process, password changes, and recovery.
Configuration options for Network, Advanced, GPS/Time, Certificate, and Reset.
Information on network firewall configurations for optimal performance.
Specific firewall rules for enterprise environments.
Interpreting the status of the Network Extender's LED lights.
Lists common alarms and steps to resolve them.
General| Model | SLS-BU10G |
|---|---|
| Category | Extender |
| Maximum Data Rate | 1200 Mbps |
| Ports | 1x Gigabit Ethernet |
| Wireless Standard | 802.11ac |
| Frequency Band | 2.4 GHz / 5 GHz |
| Security | WPA, WPA2 |
