Need help?Do you have a question about the Samsung 4G LTE Network Extender 2 and is the answer not in the manual?
General| Coverage Area | Up to 7, 500 square feet |
|---|---|
| Connectivity | Ethernet |
| Simultaneous Users | Up to 16 |
| Power Input | 100-240V, 50-60Hz |
| Frequency Bands | B2 (1900 MHz), B4 (AWS 1700/2100 MHz) |
Lists products/software this guide applies to.
Explains symbols and conventions used in the manual.
Details document versions, dates, and changes made.
Provides an overview of the document's structure by section and title.
Lists other available documents for the Network Extender.
Important safety warnings and precautions for using the product.
Congratulates on purchase and introduces the Network Extender 2.
Highlights key functionalities like enhanced coverage and easy setup.
Outlines prerequisites for internet access, phone compatibility, and GPS signal.
Explains the fundamental features and components of the Network Extender.
Provides step-by-step instructions for installing and setting up the Network Extender.
Details how to verify connection and make calls using the Network Extender.
Explains how to view device IP, timing source, and CSG mode on the LCD.
Steps to access the Network Extender's local admin website via a web browser.
Describes the Welcome page showing device status and basic information.
Explains icons for service, GPS, connected devices, and sign-in status.
Details how to sign in to the admin website using default credentials.
Guides on recovering a forgotten password via a security challenge.
Displays system information and operational status on the Home page.
Shows current users and peak capacity utilization over time.
Allows configuration of DHCP, IP address, DNS, gateway, and other network parameters.
Manages transmit power and views neighboring cell tower information.
Enables changing the local admin password and setting up a security challenge.
Configures time zone for admin logs and device network time.
Allows uploading custom SSL certificates and private keys for secure web access.
Displays connectivity, operational status, and alarms for diagnostics.
Shows GPS status, satellite IDs, signal quantities, and quality for location acquisition.
Displays bandwidth utilization trends in 15-minute and 8-hour graphs.
Provides contact information for customer support and resources.
Details required firewall settings, destination ports, and IP addresses for network administrators.
Guides on installing an extension cable to improve GPS reception indoors.
Covers installing an outdoor GPS antenna to improve signal reception.
Outlines the components of a GPS antenna system for outdoor installation.
Explains types of GPS signal interference and methods to avoid or minimize them.
Details safe installation methods for GPS antennas and optional arrestors, including mounting and grounding.
To Next Page
