How to fix Samsung SND-5061 access from a web browser?
If you cannot access the Samsung Security Camera from a web browser, ensure the camera's Network settings are correct, all network cables are properly connected, and, if using DHCP, the camera obtains dynamic IP addresses without issues. If connected to a Broadband Router, verify that port forwarding is correctly configured.
What to do if the Samsung Security Camera is not detected in the IP installer program?
If your Samsung Security Camera, connected to the network, isn't detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
Why does my Samsung SND-5061 Security Camera viewer disconnect during monitoring?
If your Samsung Security Camera viewer gets disconnected during monitoring, check all network connections. Also, if the camera is connected over a PPPoE network, disconnections can occur under poor network conditions.
Why do Samsung SND-5061 Security Camera images overlap?
If images from your Samsung Security Camera overlap, check whether two or more cameras are set to a single multicast address instead of different addresses.
General| Brand | Samsung |
|---|---|
| Model | SND-5061 |
| Category | Security Camera |
| Language | English |
Explains warning and caution symbols used in the manual.
Details the features of the network camera product.
Lists the minimum PC requirements for using the camera software.
Lists the items included in the product package.
Provides a visual overview of the camera's appearance and ports.
Shows the appearance and ports of a different camera model.
Step-by-step guide for installing the SND-5011/SND-7011 camera.
Step-by-step guide for installing the SND-5061/SND-7061 camera.
Instructions for connecting the camera to external devices.
Guides connecting the camera to a local network via PC.
Setup for connecting camera to DHCP-based modem.
Setup for connecting camera to PPPoE modem.
Connects camera to broadband router with PPPoE/cable modem.
Explains the buttons and functions within the IP Installer utility.
Manual configuration of static IP address for the camera.
Information and setup for dynamic IP environments.
Configures port forwarding on routers for remote access.
Accessing the camera from a PC on the same local network.
Accessing the camera remotely over the internet.
Steps to access the camera via a web browser.
Instructions for logging into the camera's web interface.
Guide to install necessary plugin for web viewing.
Explains the controls and features on the live viewer screen.
General overview of camera configuration through the network.
Configures video profiles, resolution, and quality settings.
Adjusts camera settings like white balance and exposure.
Details how to adjust camera white balance for optimal colors.
Configures Backlight Compensation for specific areas.
Adjusts exposure parameters for the SND-5011/SND-7011 camera.
Adjusts exposure parameters for the SND-5061/SND-7061 camera.
Configuration for special features like Day/Night mode.
Settings for On-Screen Display elements like camera titles.
Configures time and date display settings on the screen.
Sets up smart codec for specific video areas (ROI).
Configures network interface, ports, DDNS, security, and protocols.
Configures FTP/Email, alarm inputs, schedules, and detection events.
Manages product information, date/time, user accounts, and system upgrades.
Technical specifications for different camera models.
Provides solutions for common camera problems.
Lists open-source software used and their licenses.
Details the various software licenses applicable to the product.
To Next Page
