English _49
● INSTALLATION & CONNECTION
<SNV-5084R>
Sensor Alarm
(Warning lamp)
• ALARM-IN : Used to connect the alarm input sensor or external day/night sensor.
• ALARM-OUT : Used to connect the alarm output signal.
• GND : Common terminal to connect alarm signals.
J
`
If devices (e.g., flashing light and siren) that exceed the voltage and current specifications are
connected by using the open collector method, it may cause malfunction.
Refer to the “Alarm Out Wiring Diagram” when connecting devices that exceed the voltage and
current specifications. (page 50)
To Next Page
Loading...
